Special plastic plate automatic hot stamping machine hot stamping machine
author: Ada
2022-09-27
The white plastic plate is too monotonous, so add some lines to it, which is more geometric and three-dimensional and more beautiful. Let's take a look at how the white plastic plate is automatically hot stamped with this special automatic hot stamping machine?
1 Put the plastic plate into the feeding trough on both sides of the machine, and the feeding manipulator on both sides directly grabs the plastic plate of the material cage on both sides and puts it on the fixture at the same time, and the fixture is pushed to the bronzing position. Still in the process of feeding, the clamp is removed,
2.The unloading manipulator moves the plastic plate out in parallel and puts it on the unloading conveyor belt. The plastic plate is sent to the automatic stacking material by the conveyor belt. The automatic stacking area can set the number of materials to be stacked. After reaching the set number, start For the stacking in the other direction, the workers will take out the stacked materials, and all of them will be completed automatically.
3.The automatic hot stamping machine for hot stamping plastic plates uses PLC advanced modular program controller and touch screen operation display control system, which has a high degree of automation, fast parameter setting, and simple and flexible operation.
4.Driven by high-precision cylinder and high-precision servo motor, the structure is reasonable and simple, and high-quality bronzing.
5.There are automatic detection functions such as whether the piece is not hot, no material alarm, low air pressure alarm, overload and loading and unloading fault alarm, to ensure the continuity and stability of the whole machine operation.
6.This equipment adopts a fully enclosed operation mode inside and outside the operation, the high temperature part has a protective cover, and the bronzing area is equipped with a grating to prevent any work-related injuries caused by human factors. The main operating door of the machine is normally closed, and when the main operating door is opened, the equipment will automatically stop working and give an alarm. The other outer doors are fastened with screws and have mesh protection, so that the operation of the machine can be observed at any time.
If you want to achieve these results, welcome your inquire!
1 Put the plastic plate into the feeding trough on both sides of the machine, and the feeding manipulator on both sides directly grabs the plastic plate of the material cage on both sides and puts it on the fixture at the same time, and the fixture is pushed to the bronzing position. Still in the process of feeding, the clamp is removed,
2.The unloading manipulator moves the plastic plate out in parallel and puts it on the unloading conveyor belt. The plastic plate is sent to the automatic stacking material by the conveyor belt. The automatic stacking area can set the number of materials to be stacked. After reaching the set number, start For the stacking in the other direction, the workers will take out the stacked materials, and all of them will be completed automatically.
3.The automatic hot stamping machine for hot stamping plastic plates uses PLC advanced modular program controller and touch screen operation display control system, which has a high degree of automation, fast parameter setting, and simple and flexible operation.
4.Driven by high-precision cylinder and high-precision servo motor, the structure is reasonable and simple, and high-quality bronzing.
5.There are automatic detection functions such as whether the piece is not hot, no material alarm, low air pressure alarm, overload and loading and unloading fault alarm, to ensure the continuity and stability of the whole machine operation.
6.This equipment adopts a fully enclosed operation mode inside and outside the operation, the high temperature part has a protective cover, and the bronzing area is equipped with a grating to prevent any work-related injuries caused by human factors. The main operating door of the machine is normally closed, and when the main operating door is opened, the equipment will automatically stop working and give an alarm. The other outer doors are fastened with screws and have mesh protection, so that the operation of the machine can be observed at any time.
If you want to achieve these results, welcome your inquire!
The 5th Pearl River Fair exhibited automated silk screen printing machines
How to maintain the automatic screen printing machine
